My DS4/PS4 controller would connect to my PC but wouldn't be detected as a controller or function with Windows, Steam or DS4 Windows, or InputMapper. I'd been searching far and wide to solve this. With no luck, many posts giving the same solutions that didn't work. Turn on your PC. Connect the micro-USB end of the cable to the back of your PS4 controller. Connect the USB-A end of the cable to a USB port to your PC. Wait until your PC makes a sound to confirm the controller's connection. When the sound's made, that means your PC has connected successfully to your PC! To do this, press and hold the PS button and the Share button at the same time for three seconds. After a few seconds, the light on the back of the controller will start flashing. Next, open up the Bluetooth settings on your PC. You should see your controller listed as an available device. Select it and click “Pair.”. 1) Launch Steam Client. 2) Select the controller icon at the right corner of the Steam with your mouse or controller to enter Big Picture Mode (I assumed you have connected the controller to the computer. If not, learn how to connect PS4 controller to PC .). 3) Select Settings at the upper corner of the window. If your PS4 DualShock Controller is not connecting or pairing or just not working then i give you two easy fixes. Amazon Daily Deals: The easiest way to figure this out is by connecting it to a PS4 and seeing if it works properly. If you don't have a PS4 but have access to another computer, try using the DS4 on the PC and see if Turn the PS4 controller around and you will see a small hole on the back. This is located next to the upper left side. Insert the object and you should feel a button being pushed. Hold the button for about three seconds and you should hear two beeps. Remove the object. This should also turn off the controller. 1) Turn off your PS4. 2) Locate the reset button. The reset button is a small button on the back of the PS4 controller under the L2 button . 3) Use a paper-click or something similar to push the button into the tiny hole. Hold the button down for about 3~5 seconds and release. 1 Answer. Sorted by: 1. Try resetting the controller itself. There is a small pin hole on the back next to the L2 trigger. Hold it down for 3-5 seconds with a paperclip or small screwdriver, then plug it in with the USB cable and press the PS button and see if it will sync then. Source. N0BM.

can t connect ps4 controller to ps4 after connecting to pc